background image

User Instructions

  FREQ 16 Strobe    

                                  Introduction

©

American DJ Supply

®

  -  www.americandj.com  - FREQ 16 Strobe Instruction Manual Page 2

  Rev. 3/14

Unpacking: 

Thank you for purchasing the FREQ 16 Strobe by Ameri-

can DJ

®

. Every FREQ 16 Strobe has been thoroughly tested and has 

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all accessories necessary to operate the unit has 

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Do not return this unit to your dealer without first contact-

ing customer support. 

Introduction: 

The FREQ 16 Strobe is part of American DJ’s continu-

ing pursuit for creating high quality affordable intelligent fixtures. The 

FREQ 16 Strobe is a revolutionary 16-zone LED strobe. The unit has 

4 operating modes; Sound Active (with adjustable sound sensitivity), 

Show Mode, Manual Mode, or DMX Control. This unit can be used as 

a stand alone fixture, or in a Master/Slave configuration. This fixture is 

suitable for theaters, studios, retail stores, and other similar locations.  

 

Customer Support:

 American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.americandj.com for any comments or 

suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ

®

.

PLEASE recycle the shipping carton when ever possible.

Summary of Contents for FREQ 16 Strobe











Reviews: