American DJ FREQ 16 Strobe, User Instructions

Page: 6 / 10

©
American DJ Supply
®
- www.americandj.com - FREQ 16 Strobe Instruction Manual Page 12
©
American DJ Supply
®
- www.americandj.com - FREQ 16 Strobe Instruction Manual Page 11
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to allow the LED display to turn off after 2 min-
utes. Press any button to turn the LED display on again.
3. Press ENTER to confirm your selection.
DISP
- This will “flip” the LED display
1. Press the MENU button until “ DISP ” is displayed, press
ENTER.
2. When “
DISP ” is displayed the LED display will remain normal,
when “ DSIP ” is displayed, the LED display will be “flipped”.
Use the ENTER button to find your desired display set up, then
press MENU to confirm and exit.
TEST
- This function will run a self test program.
1. Press the MENU button until “ TEST ” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
TEMP
- With this function you can check the current tem-
perature of the fixture.
1. Tap the MENU button until “ TEMP ” is displayed, press ENTER.
2. The current temperature of the fixture will now be displayed.
Press MENU to exit.
FHRS
- With this function you can display the running time
of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
FREQ 16 Strobe System Menu FREQ 16 Strobe System Menu
MENU to exit.
VER
- This will display the software version
1. Press the MENU button until “ VER ” is displayed. Press the
ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.