background image

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

  Flash Panel 16                                              Specifications

  Model:  Flash Panel 16

   SPECIFICATIONS:

 
   LEDs: 

 

 

16 x 0.164W 3-in-1 LEDs

  Working Position:   

Any safe working position

   Voltage:    

 

90~240V, 60/50Hz

   Power Draw: 

 

6W Max.

  Weight:     

 

3lbs./ 1.4Kgs.

   Dimensions:  

 

9.8” (L) x 9.8” (W) x 1.85” (H)

   

 

 

 

250 (L) x 250 (W) x 47 (H) mm

   Colors: 

 

 

RGB Color Mixing

   DMX Channels:   

48 Channels

  Warranty:                         3 Year (1095 days)

Please Note: Specifications and improvements in the design of 
this unit and this manual are subject to change without any prior 
written notice.

©

American DJ Supply

®

  -  www.americandj.com  - Flash Panel 16 Instruction Manual Page 15

Auto Sensing Voltage:

 This fixture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the 
power source.

Summary of Contents for FLASH PANEL 16









Reviews: