©
American DJ Supply
®
- www.americandj.com - Flash Panel 16 Instruction Manual Page 11
Flash Panel 16 Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Flash Panel 16 Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Check your dipswitch settings.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
©
American DJ Supply
®
- www.americandj.com - Flash Panel 16 Instruction Manual Page 12
Flash Panel 16 Programs & Dipswitch Settings
Dip1 Dip2 Dip3 Dip4 Dip5 Program
1 0 0 0 0 Red
0 1 0 0 0 Green
1 1 0 0 0 Yellow
0 0 1 0 0 Blue
1 0 1 0 0 Purple
0 1 1 0 0 Cyan
1 1 1 0 0 White
0 0 0 1 0 Half Red & Half Green
1 0 0 1 0 Half Red & Half Blue (1)
0 1 0 1 0 Half Green & Half Purple (1)
1 1 0 1 0 Half Red & Half Blue (2)
0 0 1 1 0 Half White & Half Off
1 0 1 1 0 Half Red & Half Off
0 1 1 1 0 Half Red & Half Blue (3)
1 1 1 1 0 Half Green & Half Purple (2)
0 0 0 0 1 Seven Color Dreaming
1 0 0 0 1 Seven Color Holistic Flow
0 1 0 0 1 Seven Color Flow Direction 1
1 1 0 0 1 Seven Color Flow Direction 2
0 0 1 0 1 Seven Color Double Flow
1 0 1 0 1 Seven Color Trailing Flow (1)
0 1 1 0 1 Seven Color Trailing Flow (2)
1=On
0=Off
Dipswitches 6-8 will control the speed of the moving programs.
