![background image](http://html1.mh-extra.com/html/american-dj/event-bar-pro/event-bar-pro_user-instructions_2923076002.webp)
ADJ Produc
t
s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 3
• 5 DMX Channel Modes; 2 Channel Mode, 17 Channel Mode, 20
Channel Mode, 22 Channel Mode, & 25 Channel Mode.
• 3 Operating Modes - Show Mode, Sound Active & DMX Control
• 8 Built-In Shows
• UC3 Controller Compatible (Sold Separately)
• Digital Display for Address and Function Setting
• Power Cord Daisy Chain (See page 22)
• Omega Bracket for Truss Mounting
• Built-In Mount for a lighting stand (Stand Sold Separately)
Event Bar Pro
Features
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become hot. Avoid touching the
unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modification to this unit.
Event Bar Pro Handling Precautions
Event Bar Pro
Warranty Registration
The Event Bar Pro carries a 2 year (730 days) limited warranty. Please
fill out the enclosed warranty card to validate your purchase and war-
ranty. You may also register your product online at www.adj.com. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. If the
unit is under warranty you must provide a copy of your proof of pur-
chase invoice. Please contact ADJ customer support for a R.A. num-
ber.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Event Bar Pro
General Instructions
ADJ Produc
t
s, LLC - www.adj.com - Event Bar Pro Instruction Manual Page 2
Event Bar Pro
General Information
Unpacking:
Thank you for purchasing the Event Bar Pro by ADJ
Products, LLC. Every Event Bar Pro has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support first.
Introduction:
The Event Bar Pro is DMX intelligent 4-head moving
pinspot LED fixture. The Event Bar Pro has 3 DMX Modes; 1 Channel
DMX Mode, 12 Channel Mode, and 14 Channel Mode. The fixture has
three operating modes; sound active mode, show mode, or DMX con-
trolled. The Event Bar Pro can only be run as a stand alone unit or in
Master-Slave configuration. This unit is suitable for theaters, studios,
retail stores, and other similar locations. For best results use fog or
special effects smoke to enhance the light projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(323) 582-3322
Fax:
(323) 832-9142
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!