Designer.™
1. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up procedures included with
your DMX controller.
2. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
3. Press the MENU button until “Addr” is shown in the display. Press
the UP or DOWN button to change the DMX address. Once you
have found your desired address press the ENTER button.
4. The Energy DMX™ uses two DMX channels. See page 11 for
detailed description of the DMX traits. Use your DMX controller
to activate the various built-in patterns.
5. For help operating in DMX mode consult the manual included
with your DMX controller.
NOTE:
If running in Master/Slave address configuration while using a
DMX controller, follow the DMX address setttings on page 10
for either a 4-light show or 8-light show.
Master-Slave Operation (Built-In Programs):
This mode will
allow you to link up to 16 units together and operate without a control-
ler. In Master-Slave mode, the units will strobe to a built-in program. In
Master-Slave operation one unit will act as the controlling unit and the
others will react to the controlling units programs. Any unit can act as
a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. For longer cable runs we suggest a
terminator at the last fixture.
2. Choose a unit to function as the Master and set the DMX address
to 1.
3. Follow the DMX addresses on page 10 for either a 4-light show
or 8-light show.
Patterns in a 4-light show.
Pattern
Activation
SH-0
1234 FULL ON
SH-1
1-2-3-4
SH-2
4-3-2-1
SH-3
1-2-3-4-3-2
SH-4
12-34
SH-5
24-13
SH-6
23-14
SH-7
1-12-123-1234-123-12-1-STOP
SH-8
4-43-432-4321-432-43-4-STOP
SH-9
1-2-1-2-3-4-3-4
SH-A
4-1-4-1-2-3-2-3
SH-B
3-1-3-1-2-4-2-4
Patterns in a 8-light show.
Pattern
Activation
SH-0
12345678 FULL ON
SH-1
1-2-3-4-5-6-7-8
SH-2
8-7-6-5-4-3-2-1
SH-3
81-72-63-54-63-72-81
SH-4
15-26-37-48
SH-5
84-73-62-51
SH-6
1357-2468
SH-7
1234-5678
SH-8
1256-3478
SH-9
12-23-34-45-56-67-78-81
SH-A
87-76-65-54-43-32-21-18
SH-B
54-63-72-81
Energy DMX™ Operating Instructions
Energy DMX™ Master/Slave Programs
1
3
7
5
DMX Address for a 4-light show:
Master
Slave 2
Slave 3
Slave 1
1
3
7
5
DMX Address for a 8-light show:
Master
Slave 2
Slave 3
Slave 1
9
11
13
15
Slave 4
Slave 6
Slave 5
Slave 7
©
American DJ
® -
www.americandj.com - Energy DMX™ Instruction Manual Page 10
©
American DJ
® -
www.americandj.com - Energy DMX™ Instruction Manual Page 9
