Energy DMX™ Operating Instructions
Energy DMX™ System Menu
Power Supply:
This unit is available only in 120v. Before plugging
your unit in be sure the source voltage in your area matches the
required voltage for your American DJ
®
Energy DMX™.
General Operation:
This fixture is designed to operate as a stand
alone, sound-active unit, or in a Master/Slave configuration. It can
also operate via DMX controller. The Energy DMX™ is ready to be
plugged in out of the box. After plugging the power cord into a power
outlet the unit will immediately begin to strobe.
Duty Cycle:
Because the Energy DMX™ can be used for continuous output (ie
while simulating lightning), it can build up intense heat. Due to the
build up of intense heat the unit should not run for 15 minutes contin-
uously. After 15 minutes of continuous use, allow the unit to cool for
about fifteen minutes, this will greatly increase the lamp life and insure
product longevity.
Optional Remote:
American DJ
®
offers a blackout control that may be used to control
the unit by remote such as the IRC-1 controller. Some remote con-
trols will allow you to chase several strobes and some may allow you
to only adjust the flash rate. The remote operations very by model,
please see your dealer or visit our web site for more information on
the available remote controls.
Operating Modes:
Sound Active:
In sound active mode the unit will run to the beat of the music.
1. To set your Energy DMX™ to sound active mode, press the
MENU button once until the LCD shows “
NAST
”, and press
ENTER.
2. Press the UP button so that the LCD shows “
YES
”, and press
ENTER.
3. If you have done it correctly the LED next to MASTER will light
up. Also, whenever it receives a low frequency sound the LED
next to SOUND will light up.
Universal DMX Control:
This mode allows you to use a univer-
sal DMX-512 controller such as the LSC
®
DMX Operator™ or Show
Energy DMX™ Control Panel
MENU
To select the progra mmi ng functions
DO WN
To go backward in the selected functions
UP
To go forward in the selected func tions
ENTE R
To confirm the selected func tions
DMX
On
DMX input present
MASTE R
On
Master mo de
SLAVE
On
Slave mode
SOU ND
Blinking
Sound activation
©
American DJ
® -
www.americandj.com - Energy DMX™ Instruction Manual Page 8
©
American DJ
® -
www.americandj.com - Energy DMX™ Instruction Manual Page 7
