background image

Unpacking: 

Thank you for purchasing the DJ Spot 300 by American 

DJ

®

.  Every  DJ  Spot  300  has  been  thoroughly  tested  and  has  been 

shipped in perfect operating condition. Carefully check the shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Please do not return this unit to your dealer without con-

tacting customer support first. 

Introduction: 

The DJ Spot 300 is a eight channel, moving head, intel-

ligent DMX fixture. The fixture can operate in three different operating 

modes; stand alone, sound-active, or in a Master/Slave configuration. 
The DJ Spot 300 comes with several built in programs and is best used 
in multiples of four. 

For best results use fog or special effects smoke to 

enhance the beams projections. 

During the initial start-up or use of this product a light smoke or 
smell  may  arise  from  the  unit.  This  is  a  normal  process  and  is 
cause by the heat associated with the lamp.

 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:

00 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

  DJ Spot 300  

      

                             General Information

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   Do not spill water or other liquids into or on to your unit.
•   Be sure that the local power outlet match that of the required volt-
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been 
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 22 for cleaning details.

•   Heat -This fixture should be situated away from heat sources such 

   as radiators, heat registers, stoves, or other appliances (including 
   amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. Objects have fallen, or liquid has been spilled into the appliance.

    B. The appliance has been exposed to rain or water.
    C. The appliance does not appear to operate normally or exhibits a  

     

  

 marked change in performance.

 DJ Spot 300  

 

                       Safety Precautions

©

American DJ

®

  -  www.americandj.com  - DJ Spot 300 Instruction Manual Page 4

©

American DJ

®

  -  www.americandj.com  - DJ Spot 300 Instruction Manual Page 3

Summary of Contents for DJ Spot 300













Reviews: