2.2.1 Latch Buttons
2.2.2 Flash Buttons
The 8 Latch buttons are used to turn on/off or
latch the matching channel. Latch 1-4 buttons
are used for Group 1 while Latch 5-8 buttons
for Group 2.
Pressing and holding down the button for two
seconds will change the channel between On
and Off.
When the channel is Off, the channel goes out
regardless of the chase of pattern.
When the channel is On, tap the Latch button
to change the channel between On and Latch.
If the channel is On, the channel is activated
by the chase of pattern. If the channel is Latch,
the channel lights regardless of the chase of
pattern.
The 8 Flash buttons are used to momentarily light
the corresponding channel.
Pressing and holding down the button will give
full intensity to the corresponding channel, release
will deactivate this function.
LATCH
FLASH
2. Operation Guide
2.2.3 Select Chase Group
1. Turn the main power on, the Segment Display
shows the operating mode of last change and
the Stand By LED blinks.
Tap the Page button to scroll through the 4 pages,
the red LED indicates which page you've selected.
PAGE
PAGE-1
PAGE-2
PAGE-3
PAGE-4
Stand By
7
