2.2.7 DMX Mode
1. Tap the DMX In button, the Segment Display
shows "A" followed by three numbers which
indicates the DMX address for the starting
DMX channel.
Now you may use the unit as a 32 channel
DMX pack which allows you to control the
turning on or off of the channel 1-32 through
the DMX controller. If the DMX value is less
than 20%, the channel will go out. If the level
amounts to or exceeds 20%, the channel
will light.
This unit also allows you to control the Stand
By function if the DMX address for channel
33 is available.
3. Tap the Exit button to exit from DMX mode,
this unit will return to normal operating mode.
2. Tap the Up or Down button to select the DMX
address from 001-512. Be sure your DMX
controller's address matches the DMX address
you've set. If the DMX address is not available
for the channel, the channel will go out.
For example, if the DMX address is 512,
channels 2-31 will go out.
DMX IN
EXIT
UP
UP
2. Operation Guide
OR
5
12
