2. Operation Guide
2.1 Set-Up
2.2 Basic Operations
1. Connected the supplied 9 pin com cable from the output on the rear of this unit
to the input of the power pack.
2. Connect your lighting effects to the channel output on the power pack.
3. Plug in a DMX controller to your unit via the 3-pin XLR cables.
4. After you have made all your connections, turn the main power on.
5. Wait for at least 1 second to turn the main power on a second time.
6
This unit is a 32 channel controller, has 4 Pages of banks, each bank consisting
of two separate chase groups for 8 channel output. Each chase group has three
operating modes: Pattern Mode, Audio Mode and Logic Mode.
This unit consists of 8 Latch buttons allowing to turn on/off and latch the matching
channels, 8 Flash buttons to momentary turn the corresponding channel on, a
Program button enabling you to program a chase pattern including 16 steps x 4
pages, a DMX In button to activate the DMX function.
General
