2.2.8 Program Mode
4. Once the scene is satisfactory, tap the Next
button to store the step into memory and you
are prompted to program next step.
If you want to change last step, tap the Last
button and set the scene again.
5. Repeat step 3 and 4 until you've programmed
the desired steps(up to 16 steps).
6. Tap the Program button causing the
programmed pattern to chase, the Segment
Display shows "RUN".
Tap the Program button a second time to
re-program the chase pattern.
NEXT
PROGRAM
2. Operation Guide
2
7. Tap the Speed button, the Segment Display
shows the current chasing speed indicated
by three or four numbers.
If the Segment Display shows three digits,
the speed is in second cycle.
For example: 3:00 indicates 3 seconds.
If the Segment Display shows four digits,
the speed is in minute cycle.
For example: 03:00 indicates 3 minutes.
SPEED
03:00
14
