background image

©

American DJ

®

  -  www.americandj.com  - Aquarius 250™ Instruction Manual Page 3

• ZB-ELC  24v/250w Lamp

• DMX-512 Compatible

• Master/Slave Operation  
• 2 DMX Channels

 Aquarius 250™    

 

 

           Main Features

The  Aquarius  250™  carries  a  one  year  (365  days)  limited  warranty. 
Please fill out the enclosed warranty card to validate your purchase. 
All  returned  service  items  whether  under  warranty  or  not,  must  be 
freight pre-paid and accompany a return authorization (R.A.) number. 
If the unit is under warranty, you must provide a copy of your proof of 
purchase invoice. Please contact American DJ

®

 customer support for 

a R.A. number.

  Aquarius 250™    

 

           Product Registration

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   Do not spill water or other liquids  into or on to your unit.
•   Be sure that the local power outlet match that of the required volt- 
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been    
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from the 
   electrical cord. This prong is used to reduce the risk of electrical 

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Never plug this unit in to a dimmer pack
•   Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out  
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  
   the manufacturer. See page 12 for cleaning details.

•   Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances (in-
   cluding amplifiers) that produce heat.

•   The fixture should be serviced by qualified service personnel when:

    A. The power-supply cord or the plug has been damaged.
    B. Objects have fallen, or liquid has been spilled into the appliance.

    C. The appliance has been exposed to rain or water.
    D. The appliance does not appear to operate normally or exhibits a  

    

  

 marked change in performance.

 Aquarius 250™    

 

              Safety Precautions

©

American DJ

®

  -  www.americandj.com  - Aquarius 250™ Instruction Manual Page 4

Please carefully read and understand the instructions in this manual 
thoroughly before attempting to operate this unit. These instructions 
contain  important  safety  information  regarding  the  use  and  mainte-
nance  of  this  unit.  Please  keep  this  manual  with  the  unit,  for  future 
reference.

  Aquarius 250™    

 

          General Instructions

Summary of Contents for Aquarius 250









Reviews: