American DJ
®
- www.americandj.com - Accu Color 250™ Instruction Manual Page 18
American DJ
®
- www.americandj.com - Accu Color 250™ Instruction Manual Page 17
Accu Color 250™
System Menu
On-Board System Menu.
The Accu Color 250™ comes with an
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
Enter Button -
To access the main menu locate the ENTER button
(7)
on the front of the unit. Press this button to activate the system menu.
Tap the UP button
(10)
until you reach function you wish to change.
When you reach the function you wish to change tap the ENTER button
.
When a function is selected the menu will begin to flash, use the
UP
button to change the function. Once your changes are made tap the
ENTER button
again to lock the change in the system, if the ENTER
button
is not selected within eight seconds the system will automati-
cally return to menu section. To exit without making any changes tap
the MODE/ESC button
(11)
.
Accu Color 250™
System Menu
ADDR
MAIN MENU -
ADDR
DMX Address Setting
via control board -
1. Access the main menu.
2. Tap the UP button until “
ADDR
” is displayed, press ENTER.
4. Now the display will show “
A001
”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on
“
A001
”,
you can directly press the UP
or DN buttons to change the DMX start address.
TEST
MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until “
TEST
” is displayed, press ENTER.
3. The display will show “
T-01
”. You can now press the up
button and test the different channels. For example: If you
press the up button until “
T-03
” is displayed, the unit will test
the color channel, changing the color one by one and show the
rainbow effect with different speeds. There are eight channels,
but only channels 1,2,3,4, and 6 can be tested.
5. Press MODE/ESC to return to the main menu.
PLAY
MENU -
RUN
Run the unit as a “master”, or as a stand alone unit,
using a internal program -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice and press ENTER.
4. Press MODE/ESC to return to the main menu.
AUDI
Run the unit as a “master”, or as a stand alone unit,
in a sound active mode -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
“, select your choice and press ENTER.
4. Press MODE/ESC to return to the main menu.
AUTO
Runs the unit in Sound Active mode or a Auto pro-
gram -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUTO
” is displayed, press ENTER.
