American DJ
®
- www.americandj.com - Accu Color 250™ Instruction Manual Page 5
Accu Color 250™
Discharge Lamp Warning
This fixture is fitted with a discharge lamp which
is highly susceptible to damage if improperly
handled. Never touch the lamp with your bare fin-
gers as the oil from your hands will shorten lamp
life. Also, never move the fixture until the lamps
have had ample time to cool. Remember, lamps
are not covered under warranty conditions.
American DJ
®
- www.americandj.com - Accu Color 250™ Instruction Manual Page 6
This unit emits intense UV radiation which is harmful to the eyes and
skin. The intense luminance of the lamp can cause severe damage
to the retina. Never operate this unit without it’s covers, these covers
have been specially designed to shield against UV radiation.
Epileptic Warning:
Those suffering from epilepsy should avoid looking
directly into the lamp at all times.
Avoid switching the fixture on and off repeatedly in short intervals as
this will reduce lamp life and intensity.
To achieve the intensity associated with discharge lamps, these lamps
use gas sealed in a high pressure environment to emit a brilliant output.
Due to the high pressure involved with the construction of the lamp,
the lamp may explode during prolonged extensive use. This risk is
increased with age, added care is encouraged when dealing with older
lamps. Extreme caution should be used when operating this or any
fixture fitted with a gas discharge lamp. Never open this unit while in
use.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ
®
.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
American DJ
®
will not accept any liability for any resulting damages
caused by the non-observance of this manual or any unauthorized
modification to this unit.
Accu Color 250™
Handling Precautions
• Micro-Stepping Motors for Smooth Color Transitions
• DMX-512 Protocol Compatible (Uses Three DMX Channels)
• 8 Colors, Plus White - With Rainbow
• Removable Static Gobo,
• Optional 30° Beam Angle Lens
(Not Included)
• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active
• Internal Microphone
• ZB-MSD250/2 Discharge Lamp, 230v/250w
• Edit and Save Scenes into the Memory
• Manual Focus Lens
• Variable Strobe (1-12 fps)
• Digital Display for Address and Function Setting
• Mini/C Input Jack for Blackout Function
(Mini/C Controller Not Included)
Accu Color 250™
Features
Accu Color 250I™
RDMX
Regarding RDMX :
1. The units will be shipped preset in 16 channel increments
from the factory
2. While using RDMX, if all units are set to the same DMX
address, all units will change to the new DMX address you
selected.
EXAMPLE:
You have four units, and all the units are set to the
DMX address of “1”, and you change one unit to DMX address
“17”, this will cause all the units to change to DMX address
“17”.
All four units must be on 4 different starting addresses to indi-
vidually set the DMX addresses for each unit.
For more on this feature see pages 22-23.
