American Changer Bill Breaker Series, Installation, Operation And Service Manual

Page: 10 / 59

8
Section 3 – Operational Overview
3.1 – Component Description
Coin Hopper
The hopper uses the ccTalk communication protocol. It can dispense coins or tokens ranging in size from
21.01mm to 30mm in diameter and 1.25mm to 3.30mm in thickness. An option is available to dispense
smaller coins.
This machine’s coin capacity is approximately 45,000 25mm diameter coins.
Bill Validator
This model machine may have been sold without a bill validator. It is intended to work with a 24VDC bill
validator using the MDB protocol.
6-Pin (MDB) Connector Pinout:
Pin #1 - +24VDC Power
Pin #2 - DC Power return
Pin #3 - Not Used
Pin #4 - Master Receive
Pin #5 - Master Transmit
Pin #6 - Communications Common
Put coins into this opening
Coin Counting Optic
Motor
12-Pin female connector
(located in rear of hopper)
6-Pin (MDB)
4
1 6
3