American Changer Bill Breaker Series, Installation, Operation And Service Manual

Page: 24 / 59

22
Crane Payment Innovations (CPI) AE 2600 Series
You can clean the bill acceptor while it is still mounted in the machine
1. Remove power from the machine.
2. Unlatch the magazine by pushing the yelow latch (located on the top of the unit) toward
the front of the unit.
3. Unhook and remove the magazine by holding the latch and lifting up and then back on
the magazine.
4. Unlatch the LED Housing by lifting up on the metal bar (located below the Status LED).
5. Remove the LED Housing by holding the metal bar and pulling back on the LED
Housing.
6. Clean the bill path with a soft cloth. You may use mild, non-abrasive, non-petroleum
based cleaners if sprayed on the cloth.
Yellow Latch
Magazine
Bill Path
LED Housing
Status LED
Service
Button