American Changer Bill Breaker Series, Installation, Operation And Service Manual

Page: 13 / 59

11
3.2 – Functional Description
1. Dispense The machine dispenses bills and/or coins.
2. Payment The machine accepts payment in the form of cash only.
3.3
– Out-of-Service Conditions & Error Codes
System
Failures Below are conditions that will cause the machine to go into
an “Out -of- Service” mode. The message “Temporarily out
of Service” will be displayed on th e external LCD display
when the machine is in an “Out -of- Service” mode.
Note: These error messages can only be viewed by using
the Flex Programmer Board.
Bill Validator Bill Validator Error Conditions
Motor Validator stacker/transport motor has failed
Sensor Sensor failure
CheckSum Indicates error with file stored on validator main board
Jammed A bill or debris is jammed in the validator bill path
Cashbox The cashbox is not installed on the bill validator
No Comm. The Flex-2 main logic board is unable to communicate with
the bill validator.
Can’t
Enable
The Flex-2 main logic board has tried to enable the
validator several times without success.
Coin Hopper Coin Hopper Error Conditions
Opto’s Indicates the coin counting optic is blocked.
No Comm. The Flex-2 main logic board is unable to communicate with
the coin hopper.
High
Current The hopper motor exceeded its maximum current rating.