off automatically after low power being indicated and displayed.
Reset of the Tachograph
In event of abnormality occurs arising from improper operation to it, it can be started by pressing RESET button
and its normality will be restored.
Basic operations of the Tachograph
Set The Language:
English/Simplified Chinese/Traditional Chinese/Japanese/Russian/German
The menu item that changes the language is the icon of a person speaking in a text caption.
Select this icon then select the language of choice.
Switch operation modes
There are two kinds of operation modes: video and replay modes. The operation mode can be switched by
pressing MODE button. In video mode, it can begin or stop to shoot videos by pressing OK key.
In Replay mode, the video documents are arranged in time order, you can check them by pressing upwards and
downwards buttons, and the current video can be played by pressing OK button.
Set menu
In preview mode, it will enter system set menu by pressing MENU button, the background color of menu set is
blue. Choose the items which you need to set by pressing up and down button and confirm the setting by
pressing OK button, then your can exit the menu by pressing menu button again. Video shooting mode: Dual-
lens /front lens /back lens
Time setting: Adjust the time by pressing upwards and downwards buttons and press OK button to exit.
Formatting: Enter formatting by pressing OK button to choose YES/NO. Prompt tone:
Turn on/off Voice recording: Turn on/off
Screen pre-set: Turn on/off Protection sensitivity for automatic video shooting: low/general/high/turn off the
automatic video protection function.
(
The function set the sensitivity of the automatic video shooting while the gravity sensor is starting
)
Frequency:
50HZ/60HZ. Default set: Yes/No
(
Choose to decide whether to restore the default factory parameter setting
)
Video shooting
Begin/Stop video shooting: Video shooting will begin automatically when it starts or the TF is inserted. The video
shooting may be stopped during video shooting course by pressing OK button, which may be re-begin by
pressing OK button again.
Using of shortcuts during video shooting
Press downwards button to turn off/on voice recording function. Press turn on/off button to switch between front
and back lens in full screen (which only can take effect when the DUAL- LENS mode has been chosen).
Press locking button to carry out locking protection to the current video under emergency circumstances.
Pressing mode button to stop video shooting and save the video, and switch to replay mode. And press the
MODE button again to exit replay mode and begin to shoot a new video.
Video reading/access and using instructions for AP software
It does not support direct reading/access through USB, it needs the equipment which supports MicroSDHC card
