background image

Congratulations on the purchase of your new shower system.  

This guide will give you the instructions on the installation of your new shower.
Natural Travertine Stone Appearance

All of our stone products are custom made and hand-crafted to look and feel like authentic 

travertine. As you may know, travertine is a form of limestone that has been under pressure for 

thousands of years. The product of long-ago hot and cold springs and waterfalls, travertine is a 

beautifully banded and colored stone with a unique character. Among its most appealing  

characteristics are the interesting craters and depressions, created by streams of water that 

flowed through the stone.We have taken great care in reproducing the appearance of genuine 

travertine stone, giving you a beautiful and authentic shower.

Installation time may vary depending on your experience, complexity of shower, 

and “Pre Installation Preparation Work” which may include: plumbing relocation, 

drain location and bathroom demolition.

Prior to demolition, scheduling a contractor or building your shower, double check that you 
have all the parts from the factory. Some applications may require a licensed plumber or  
contractor. Do not use any product spec sheets to begin installation before receiving product. 
These spec sheets are for reference only. Use actual product measurements only. 
The diagrams throughout this guide illustrate a 36” x 36” shower. Depending on the size of the 
shower purchased, actual parts may vary in size from the diagrams shown.
Our goal is to help you achieve a quick and successful shower installation.   

 

  
 

       See the clock in each section for estimated installation time.

Missing or damaged hardware and tiles should be reported within 24 hours  

of receiving this shipment - If you need assistance call 1.800.454.2284,  

7:15 am - 4:00 pm PST, Monday thru Friday.

Neo Threshold Shower System Installation Guide for Liner Style & Accent Liner Style Showers

G_00828-HNF-7.29.14 Rev A

NEO CORNER - HNF

TM

Summary of Contents for Sistine Stone Neo Corner-Hnf















Reviews: