Figure 32
JOG WHEEL TOUCH SENSITIVITY:
This function works with the SCRATCH effects. This function allows
the play and cue commands to be controlled by tapping on the touch sensitive jog wheel.
ADJUSTING JOG WHEEL TOUCH SENSITVITY:
The degree of sensitivity can be adjusted to make it
more or less sensitive. Press and hold the
folder knoB (20)
to enter the INTERNAL MENU. Turn the
time
or
ratio knoBS (31 & 25)
clockwise till SENSITIVITY is displayed. Press the
time
or
ratio knoBS (31 &
25)
to enter the SENSITIVITY menu. Turn the
time
or
ratio knoBS (31 & 25)
to find your desired sensitivity,
the range of sensitivity is from -20 to +20. The
Vfd (3)
will display the degree of sensitivity. When you have
found your desired level press the
time
or
ratio knoBS (31 & 25)
to confirm. When you are finished press
the
folder knoB (20)
to exit the INTERNAL MENU.
TOUCH SENSITIVE JOg WHEEL/BOp EffECT
©
American Audio
®
- www.AmericanAudio.us - Radius 2000™ Instruction Manual Page 27
ACTIVATING TOUCH SENSITIVITY:
Before you can use the
jog Wheel
(9)
to control the play and cue commands you must first activate the jog
wheel touch sensitivity. To activate the touch sensitivity mode, press the
a.cue Scratch Button (12)
. This will activate touch sensitivity mode.
IN PLAYBACK MODE:
While in play mode and
when the touch sensitivity function is active, the
jog
Wheel (9)
can be used to return the unit to last cue
point. Simply touch the
jog Wheel (9)
and unit will
immediately return to the last set cue point and play-
back without music interruption.
IN CUE MODE:
While in cue mode and when the touch sensitivity
function is active, tapping on the
jog Wheel (9)
can be used to start
playback. The unit will continue to playback until the
jog Wheel (9)
is released. Once the
jog Wheel (9)
is released the unit will return to
the last cue point.
Figure 33
Figure 34
Important Notice:
When the BANK BUTTON LED is flash-
ing, the unit will return to the last CUE point.