©American Audio® - www.americanaudio.eu
ELX Series
User Manual Page 15
(11) Channel A & B XLR Inputs
– Channel A & B 3-pin XLR balanced input jack. See chapter 7 (Set Up) for more details.
Channel A & B XLR THRU Inputs
– These inputs are parallel outputs of the inputs used to link multiple amps.
(12) Ground Lift Switch
– This switch allows the ground signal or chassis ground to be separated in case of a ground conflict. For the safety of the
amp, it is recommended to keep the switch in the GND FLOATING position. In case of a ground conflict please set the switch to GND LIFT.
(13) Mode Switch
– This switch controls the amplifiers’ operating mode. The amplifier can operate in two different modes;
Mono Bridge
or
Stereo
.
The amplifier is shipped in
Stereo Mode
.
(16) Air Vents
– These vents allow hot air to exit the amp. Do not place anything in front or obstruct these vents.
