BASIC OPERATIONS (CONT.)
American Audio
®
• CDS-1™ INSTRUCTION MANUAL • PAGE 19
REACTIVATING LOOP
- To reactivate a LOOP that is stored in memory
but is not playing, press the
OUT BUTTON (11)
(Figure 21)
.
The
IN BUTTON
LED (9)
and
OUT BUTTON LED (16)
will begin to flash indicating the LOOP
has been activated.
Figure 21
13. SWITCHING BETWEEN SINGLE AND CONTINUOUS PLAY
MODES:
This unit allows you to select your play mode between single
and continuos. Continuous mode allow the seamless CD playback with-
out interruption, much the same way a typical consumer CD player oper-
ates. Single mode will play a track and cue to the next track when the
previous track has ended. In certain situations this may be a useful to in
preventing unintentional playback of an undesired track. To toggle back
and forth between the playback modes press the
SGL/CTN Button (4).
Mode Indicator
: The
"SINGLE" INDICATOR (39)
will appear in the
LCD (3)
when the unit is in playback mode (figure 23). When the unit is in continu-
ous playback mode the
"SINGLE" INDICATOR (39)
will turn off.
Figure 22
Figure 23
