background image

1-YEAR LIMITED WARRANTY

A.  American Audio

®

 hereby warrants, to the original purchaser, American Audio

®

 products to be free 

of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date 
of purchase. This warranty shall be valid only if the product is purchased within the United States of 
America, including possessions and territories. It is the owner’s responsibility to establish the date and 
place of purchase by acceptable evidence, at the time service is sought. 
B.  For warranty service, send the product only to the American Audio

®

 factory. All shipping charges 

must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms 
of this warranty, American Audio

®

 will pay return shipping charges only to a designated point within 

the United States. If the entire instrument is sent, it must be shipped in its original package. No acces-
sories should be shipped with the product. If any accessories are shipped with the product,  American  
Audio

® 

 shall  have no liability whatsoever for loss of or damage to any such accessories, nor for the 

safe return thereof.  
C.  This warranty is void if the serial number has been altered or removed; if the product is modified in 
any manner which American Audio

®

 concludes, after inspection, affects the reliability of the product; 

if the product has been repaired or serviced by anyone other than the American Audio

®

 factory unless 

prior written authorization was issued to purchaser by American Audio

®

; if the product is damaged 

because not properly maintained as set forth in the instruction manual. 
D.  This is not a service contract, and this warranty does not include maintenance, cleaning or peri-
odic check-up. During the period specified above, American Audio

®

 will replace defective parts at 

its expense, and will absorb all expenses for warranty service and repair labor by reason of defects 
in material or workmanship. The sole responsibility of American Audio

®

 under this warranty shall be 

limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of 
American Audio

®

. All products covered by this warranty were manufactured after January 1, 1990, and 

bear identifying marks to that effect. 
E.  American  Audio

®

  reserves  the  right  to  make  changes  in  design  and/or  improvements  upon  its 

products without any obligation to include these changes in any products theretofore manufactured. 
F.  No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
plied with products described above. Except to the extent prohibited by applicable law, all implied 
warranties made by American Audio

®

 in connection with this product, including warranties of mer-

chantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, 
whether expressed or implied, including warranties of merchantability or fitness, shall apply to this 
product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such repair 
or replacement as is expressly provided above; and under no circumstances shall American Audio

®

 be 

liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this 
product. 

 
G.  This warranty is the only written warranty applicable to American Audio

®

 Products and supersedes 

all prior warranties and written descriptions of warranty terms and conditions heretofore published. 

   

WARRANTY

©

American Audio

®

   -   www.AmericanAudio.us   -   CDS-1™ Instruction Manual Page 22

Summary of Contents for CDS-1

























Reviews: