Amel Super Maramu 2000, Owner'S Manual, Page: 15 / 139

20
Pict. 4 – Generator
About the exhaust circuit of the generator :
It is fitted with a muffler were the exhaust gas is mixed with seawater and therefore cooled
down. When the generator is running, make sure that seawater flows out of the exhaust
discharge outlet on the hull.
2.1.3 Shore power
To get 220 V shore power on board, connect the cable located in the aft locker (portside) to
the dock's terminal. Then, in the galley, inside the locker above the sink, make sure the main
220 V circuit breaker is on.
For safety reasons, the 220 V circuit has got a solenoid switch that gives the generator
priority when running, while the boat is connected to shore power.
2.1.4 Electrical drawings
CAUTION ! Any work on the wiring system must be
done by skilled and warned workers.
Read carefully the electrical drawings and safety
instructions of the boat or concerned equipment before
starting any work.
Electrical drawings show separately the general wiring of the 12, 24 and 220 V circuits.
Oil change
discharge hose
Control panel