![background image](http://html1.mh-extra.com/html/ameba/dvr-m04/dvr-m04_user-manual_2921874035.webp)
35
35
5
5
5
5-
-
-
-3
3
3
3 Dynamic IP
Dynamic IP
Dynamic IP
Dynamic IP
If you set DHCP MODE as AUTOMATIC in IP SETUIP
(MENU→EXTERNAL DEVICE→TCP/IP SETUP→IP SETUP)
, IP information
will be automatically assigned from the ISP of DHCP.
Operation Steps
Operation Steps
Operation Steps
Operation Steps
(1) Verify the IP address is correct for your PC before connecting the DVR.
(2) Connect an LAN cable to the DVR after confirmation.
(3) Turn off and on the modem (router) the ISP provides to reset clients of MAC from the ISP. Users need to wait for
30 seconds after turning on.
(4) Verify MAC ADDRESS starts from 00-0A-A2….
(5) Set DHCP MODE as AUTOMATIC. Then click IP DETECT to get a dynamic IP.
(6) Go out of MAIN MENU after getting the IP successfully.
(7) Access the DVR via the Remote Viewer, which you can install via the attached software CD.
※NOTE
NOTE
NOTE
NOTE : If you fail to access, please verify step (1), (3), or (4) again.
CHAP.5 Network Setup