34
34
5
5
5
5-
-
-
-2
2
2
2 Static IP
Static IP
Static IP
Static IP
The TCP/IP function enables you to:
(1) See live images and recorded images
(2) Control a PTZ camera via Internet
(3) Backup.
In IP SETUP
(MENU→EXTERNAL DEVICE→TCP/IP SETUP→IP SETUP)
for the DVR, please input an IP address assigned from
the ISP.
Operation Steps
Operation Steps
Operation Steps
Operation Steps
(1) Verify the IP address is correct for your PC before connecting it with the DVR.
(2) Connect an LAN cable to the DVR after confirmation.
(3) Go to IP SETUP of the DVR, and set DHCP MODE as MANUAL.
(4) Verify if MAC ADDRESS starts from 00-0A-A2….
(5) Set IP ADDRESS (assigned from the ISP).
(6) Set IP PORT (50000 is recommended).
(7) Set GATEWAY (assigned from the ISP).
(8) Set SUBNET (assigned from the ISP).
(9) Go out of MAIN MENU.
(10) Turn off and on the modem (router) the ISP provides to reset clients of MAC from the ISP. Users need to wait
for 30 seconds after turning on.
(11) Access the DVR via the Remote Viewer, which you can install via the software CD.
※NOTE
NOTE
NOTE
NOTE : If you fail to access, please verify step (1),(5),(6),(7),(8), or (10) again.
CHAP.5 Network Setup
