25
Email Test:
This button causes the system to automatically send out an email to test the connection is OK or not.
Prior to the email test, please save the email setup information.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the
case of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote
access. Below is an explanation of fields on the UPnP settings screen:
Enable
: This checkbox allows the user to enable the UPnP function.
Mode:
This dropdown menu allows the user to set UPnP modes:
Customized:
Allows the user to set customized UPnP settings.
Reset Defaults:
Resets the UPnP settings to default.
Router State
: This field shows the UPnP status and has two options:
Mapping Failed
: This means that UPnP mapping has failed.
Mapping Successful
: This means that UPnP mapping has succeeded.
Port Mapping List
: This table is used to show how the ports for each protocol listed below have been remapped by
the UPnP protocol.
The first column shows the checkboxes to enable the corresponding service on the table.
The second column shows the name of the services. To edit this, double click on the service line item.
The third column shows the name of the protocol used by that service. To edit this, click the pencil button in the
modify column for that line item.
The fourth column shows the Internal Port used by that service to establish communication from the router to the
camera. To edit this, click the pencil button in the modify column for that line item.
o
The fifth column shows the External Port used by that service to establish communication from the router to the
internet. To edit this, click the pencil button in the modify column for that line item.
The sixth column shows the status of the protocol. If the protocol was mapped successfully, this field will say
“Mapping Succeeded”.
The seventh column allows the user to open a dialog box and edit the service’s information.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
HTTPS
This menu allows the user to enable and create HTTPS certificates. To enable HTTPS, click
Create
. Enter your
country in the Region field, enter the IP address for the camera in the IP or Domain field, enter your state into the
Province field, enter your city in the Location field, if applicable, enter the Organization and Organization unit, then
enter your email. Click
Create
.
Once this has been created, click
Install
and allow the certificate to be installed. To download the certificate, click
Download
and install the cert manually to your computer. Click on the
Enable HTTPS
option and click Save to
complete the process.
Event
This menu section allows the user to change different settings for triggering events.
