Amcor AM-40, Instruction Manual

Page: 7 / 32

GB
7
To use the scent release function:
The capsule is installed on the right
side of the lower enclosure on the
front of your appliance (see fig. 1, page
2) To install, SWITCH OFF the unit.
Remove the capsule from its protective
wrapping. Open the capsule cap by
turning it in the direction opposite to
that indicated by the arrow on the cap
(see fig. 1, page 2). Insert the capsule in
the cap until the tabs catch the cap (see
fig. 2, page 2). Insert the complete cap
(with the capsule inside it) into the air
purifier and turn the cap in the direction
of the arrow (see fig. 3, page 2). Your
air purifier will now release a pleasant
fragrance during operation.
To replace the capsule, SWITCH OFF
the unit.
First remove the cap from the air
purifier by turning it in the direction
opposite to that indicated by the arrow
(see fig. 1, page 2).
Press the tabs together and remove the
used capsule (see fig. 4, page 2).
Replace the used capsule with a new
one (see fig. 3, page 2).
��������������
��������������������
�������������������������
�����������������
������������������������������
�������������������
��������
� � ��������������
���������������
�������������������
�������������
��������������
����������
�����������
����������
�
�
�
To deactivate the scent release function:
Remove the capsule and store in a glass jar with a tight lid (if the capsule is
still active). Store the empty cap inside the lower enclosure.
C. The AMCOR ionoscope, an ion detector (see fig. 5, page 2)
What is an ionoscope?
The ionoscope is a device that detects the negative ions emitted from the ion
generator. It proves visually to the user that the ion generator is functioning.
INSTALLATION
OPERATION