13
www.amcelettronica.com
VOXOUT v. 1.2
SMS MENU: ECHO FUNCTION
This function allows the user to send all the SMS received by the dialer back to the programmed numbers.
Once you have accessed the menu, press ENTER to change and assign the tel. numbers that will have to receive the messages.
The 8 numbers are indicated in the upper row. (i.e. in fig the first 2 telephone numbers will receive all the messages received by
the dialer)
SMS/ TEL 1 2 3 4 5 6 7 8
⃞
⃞
∎
∎
∎
∎
∎
∎
MENU OF INPUTS
MENU OF INPUTS: FUNCTION
IT IS possible to program the input with the following functions:
-
= input disabled
A
= Alarm - The dialer makes the calls only when the RES input is closed low.
H =
Alarm 24h - The dialer always makes the calls, independently of the status of the RES terminal.
Double State
: you may have specific reporting of the status change of each input (from Open to Closed or Closed to Open) either
when its function is
A
or
H
MENU OF INPUTS: ASSOCIATE THE OUTPUTS
It is possible to associate an output to each input, output which will be enabled in the moment in which the input is breached.
- Access the menu by pressing ENTER, choose the input to which you want to associate the output with the vertical arrows. Confirm
by pressing ENTER; the cursor flashes, use the keys 1-5 to program the desired output.
MENU OF OUTPUTS
To each Ouput, you can assign a different Function, telephone numbers to enable it from remote, and its enabling length.
Note: the outputs can be directly enabled from the keyboard via the specific User menu
MENU OF OUTPUTS: FUNCTION
IT IS possible to program the output with the following functions:
-
= output disabled
A
= it is enabled by following the assoicated input (only with reset terminal closed)
H
= it is enabled by following the assoicated input (always, independently from the reset terminal)
T
= it is enabled following a tamper signal
U
= it is enabled by using a specific user code (local from keyboard, or from remote via voice menu or sms)
P
= it is enabled without the use of the User code, by sending out a simple ring to the dialer during the call
G
= gsm problem
I
= inputs in standby
C
= low credit
R
= it is enabled by emulating the telephone ring in case a call is received by the dialer. The Thru Ring parameter
must
be
enabled.
Once you have accessed the menu, press ENTER twice, use the rh and lh arrows to position yourself on the desired output, and
insert the function by pressing multiple times on the up key. Confirm with ENTER
MENU OF OUTPUTS: ASSOCIATE TELEPHONES
This function allows the user to enable a stable or pulse output, by simply sending out one ring to a programmed remote phone.
Once the numbers have been associated to the outputs in question, by calling the dialer and sending out
a single ring
, the dialer will
recognize the caller ID and will enable the output, and its enabling will be confirmed by an answer ring.
Once you have accessed the menu, press ENTER, with the up and down arrows choose the desired output, then press ENTER again
and use the Rh and Lh arrows to position yourself on the telephone number you want to associate press CANCEL (X) to include or
exclude the selection, and confirm with ENTER.
Please be reminded that the Output must be programmed with the function “
P
”