11
www.amcelettronica.com
VOXOUT v. 1.2
The first 8 telephone numbers are used to send voice calls, sms, or to pilot the entire system.
Press SEND to insert the telephone number
Rh or lh arrow key to move within the number
Use the CANCEL key to cancel
Confirm with ENTER
note: in case you use the system with caller ID, it is essential that you include the country dial code + 39 (i.e. +393485412963)
PROGRAM THE TELEPHONE NUMBERS (THE FIRST 8)
MENU OF TELEPHONE NUMBERS
PROGRAM THE TELEPHONE NUMBERS TO ENABLE THE OUT 5 (200 NUMBERS)
REMOTE CONTROL FUNCTION
In addition to the first 8 numbers, there is a special phone book with 200 numbers that can only be used to enable the output 5.
If one ore more numbers are inserted (including the international country code +39), by making only one ring to the dialer with
the visible number, the dialer will recognize the ID of the caller and will enable the O.C. output in pulse or stable mode, depending
on its programming.
This function has been conceived for applications in condominiums where, instead of using a remote control to open the gate, it is
possible to use one's own cellphone.
NOTE: for the remote control function, the dialer will not send out a ring to confirm that the output has been enabled.
A telephone no. inserted in the first 8
CANNOT
be inserted among the 200 of the remote control function. If need be, the remote control function
must be used from the numbers inserted in the phone book of the first 8; enable these numbers when enabling the output via a ring (in the
OUTPUTS - ASSOCIATE TELEPHONES menu).
Once you've inserted the telephone numbers, you can assign the options that concern each individual number.
The options are the following 3 and can also be enabled simultaneously:
A
: answer confirmation. The system must receive a # when the message is being listened to, to assess that a call has been successful;
if this does not occur, the system will recall the same number again for a set number of call attempts.
If you want to access the voice menu, press # a second time and type in the user code.
B
: direct access to the user menu. With this option, the user will not have to type in any code to access his menu.
C
: automatic reset of call que. If the call to the telephone number with this option is successful, the que of the remaining calls in
progress will ben canceled. W
hen this option is enabled, it may prove useful to also enable option A to ensure safety of the calls.
NUMBER WITHOUT OPTIONS:
once a phonecall is answered, it is considered successful and the system therefore moves on to the next one.
If you want to access the voice menu, press # and type in the user code.
PROGRAM THE OPTIONS TO THE TELEPHONE NUMBERS
VOICE MESSAGES: LISTEN - RECORD
MENU OF VOICE CALLS
O
nce you have accessed the LISTEN - RECORD menu, press SEND
(
✔
)
and choose the message with the upand down arrow keys.
To record, press the CANCEL
(
✘
) key:
you will have 10 seconds to make the recording (the green LED flashes), press ENTER
(
✔
)
to listen to it again.
The messages available are:
-
E01 / E05 Opening L01/L05 =
message concerning the shift of the line from NORMAL to ALARM
-
E01 / E05 Closing L01/L05 =
message concerning the shift of the line from ALARM to NORMAL
-
E11 / E15 Tamper L01/L05 =
message concerning the tamper status of the line configured as balanced input, 1kohm
-
E16 Life test =
message concerning the periodic signaling of the life test
-
E17 GSM off for 1 min
= message concerning the signaling of GSM range absence for over 1 min.
-
E18 Dialer tampering =
message concerning the breach of the dialer anti-opening tamper
-
E19 Low credit =
message notifying that the credit exhaustion threshold has been reached
NOTE: to not use if SMS Echo is
activated (Menù SMS Function Echo).
-
Line msg. 01/05
= message indicating the name associated to the line, name communicated in the voice menu during the input
status query or during the enabling/disabling of the outputs
-
System name =
heading message.
RESET OF CALLS / SMS
The sending of the VOICE CALLS and of the SMS can be reset in the following ways:
- by typing in the User (Master) code on the keyboard
- during the reception of a call, by typing the RESET CALLS code
- by opening the RES terminal in the terminal board of the dialer
- by using the foreseen OPTIONS tied to the programmed telephone numbers
The reset of the calls will be confirmed by the VOICE GUIDANCE or by the wording RESET CALLS on the display