AMC VOXOUT Installer Manual Download Page 12

12  

www.amcelettronica.com

VOXOUT v. 1.2

VOICE MESSAGES: ASSIGN TELEPHONES

With this menu, you can define the telephone numbers that will receive the various voice calls tied to the available events. The 
associable telephone numbers are 8.

- once you have accessed the menu, press ENTER to assign the messages to the phones. 

- to scroll down the events of the various messages (i.e. E01/tel), press the up and down arrow keys.
- the message no. and the 8 telephone numbers to which it can be associated are displayed in the upper row of the display. (i.e. in 

fig1 the message 1 is associated to the first 2 telephone numbers)

- press ENTER  to proceed with the messages/telephones association
- to scroll the telephone numbers, press the rh and lh arrow keys; to assign or not assign, press CANCEL. 
- confirm by pressing ENTER

E01/ TEL  1 2 3 4 5 6 7 8

 

- PLAY    

 

 

 

 

 

 

 

Fig. 1 

Keyboard display

TIME OF ATTEMPTS

Once you have accessed the menu, press ENTER to change the value.

This parameter indicates the time (expressed in seconds) that must lapse between one attempt and the next voice call attempt. 

note: we recommend that you leave the default value, unless there are special requirements.

 

ANSWER WAIT

once you have accessed the menu, press ENTER to change the value.

This parameter indicates the time (in seconds) that the system waits when it rings another external telephone.

I.E. 30° indicates that our phone called by the dialer will ring for 30 seconds, after which the dialer will hang up and will restart 
with the next call cycle.
We recommend a minimum value of 50° seconds.

NUMBER OF ATTEMPTS

Once you have accessed the menu, press ENTER to change the value.

This parameter indicates the number of call attempts made in case of an unsuccessful call.

NUMBER OF MESSAGE REPETITIONS

Once you have accessed the menu, press ENTER to change the value.

This parameter indicates the number of message repetitions during a voice call.

MENU OF SMS MESSAGES

SMS MENU: EIDT THE TEXT

Description:

- Once you have accessed the menu, press ENTER to  highlight the SMS you want to change.

Use the up and down arrows to choose the desired SMS/event, and press again to change the existent default message. The writing 

method is very similar to the one of cellphones without the aid of the T9 spelling alert.

Confirm with ENTER 

Once you have accessed the menu, press ENTER to assign the message to be assigned to the telephones. 

- to scroll down the events of the various messages (i.e. E01/tel), press the up and down arrow keys.
- the message no. and the 8 telephone numbers to which it can be associated are displayed in the upper row of the display. (i.e. in 

fig1 the message 1 is associated to the first 2 telephone numbers)

- press ENTER  to proceed with the messages/telephones association
- to scroll the telephone numbers, press the rh and lh arrow keys; to assign or not assign, press CANCEL. 
- confirm by pressing ENTER

E01/ TEL  1 2 3 4 5 6 7 8

               

    

 

 

 

 

 

 

 

SMS MENU: ASSIGN TELEPHONES

Summary of Contents for VOXOUT





















Reviews: