Ambu PEEP 20, Instructions For Use Manual

Page: 8 / 152

8
or CPAP system in accordance with the
Manufacturer´s Instructions for Use.
3. Rotate the adjustment cap to the desired
PEEP setting from 1.5 – 20 cmH₂O
(0.15 – 2.0 kPa).
4. For correct adjustment of the PEEP,
a pressure gauge should be connected
to the breathing device for monitoring
of the PEEP.
5. Used products must be disposed of
according to local procedures.
5. Technical product specifications
5.1. Specifications
Connector size ID 30 mm (EN ISO 5356-1).
Adapter size
OD 22 mm and OD 30 mm
(EN ISO 5356-1).
Adjustment
range 1.5 – 20 cmH₂O
(0.15 – 2.0 kPa).
Dimensions Length 65 – 76 mm
(depending on adjustment),
diameter 45 mm.
Weight approx. 35 g.
Operating
temperature
limits -18 °C to +50 °C (-0.4 °F to
+122 °F), tested according
to EN ISO 10651-4.
Storage
temperature
limits -40 °C to +60 °C (-40 °F to
+140 °F), tested according
to EN ISO 10651-4.
Recommended long term storage in
closed packaging at room temperature,
away from sunlight.
5.2. MRI Safety information
The Ambu Disposable PEEP 20 Valve is tested
to be MR Conditional and therefore may be
safely used in the MR environment (not inside
the MR bore) under the following conditions.
• Static magnetic field of 7 Tesla and less, with
• Maximum spatial field gradient of 16,000
G/cm (160 T/m)
• Maximum force product of 721,000,000
G
2
/cm (721 T
2
/m)
Use inside the MR bore may influence MR
image quality.
RF-induced heating and MR image artifacts
have not been tested. Any metallic parts
are fully encapsulated and do not have any
contact with the human body.