6
Section 3 Configuring WL1100B-AP Access Point
3-1 Installing USB Driver For Access Point
The Wireless Network Access Point WL1100B-AP can be configured by DFU utility for Windows
®
98/2000/ME. You need plug the USB cable with the WL1100B-AP and the USB slot of the PC to run
DFU.exe for configuring the WL1100B-AP and setting the setup.
3-1-1 Installing WL1100B-AP USB Driver For Windows
®
98
1. Please boot your PC into Windows
®
98.
2. Install WL1100B-AP software (the DFU utility) from Installation CD selection.
3. Ensure you have followed the procedure as described in the previous section to finish hardware installation.
4. Plug the two sides of the USB cable into the USB slots of WL1100B-AP and your PC.
5. Windows
®
98 will automatically detect the WL1100B-AP and prompt you to install the necessary driver.
Please make sure that the Setup Utility CD is inserted into your CD ROM and click “Next” to begin the
installation.
6. Select “Search for the best driver…” and click “Next”.
