Transport
23
− Clean all of the fi ttings carefully and dry them.
− Clean the appliance surfaces, except the door seal, with a mild cleaning agent. If
necessary, the appliance surface can be treated with silicone wax.
− Clean the door seal with clean water; wipe it off and allow it to dry.
− Put the mains plug back into the socket.
− As soon as the appliance has reached its operating temperature, you can fi ll the
appliance with food again.
Transport
− Unplug the appliance from the safety socket.
− Remove the shelf
7
from the interior of the appliance.
− Screw in the adjustable feet
5
.
− Tape the door in place using adhesive tape.
− The appliance should always be transported upright. If transported at an angle
of more than 45°, leave to stand for 2 hours before connecting to the mains and
switching on so that the cooling circuit can settle down.
Steps to take in the event of a power cut
Food must not be refrozen, even if it has not fully defrosted.
− In the event of a power cut, check the condition of the food before consuming it
(also see on page 14).
Troubleshooting
Faults may occur during operation. Please use the following table to check whether
you can resolve the problem yourself. All other repairs are prohibited and will
invalidate the warranty cover. In the event of a fault, contact our Service Centre or
another suitable professional repair workshop.
Malfunction
Problem
Remedy
The appliance is
not working.
The electrical
circuit has been
interrupted.
− Check whether the mains plug is
plugged in.
− Check whether the connection
cable has been damaged.
