Safety information
11
− Manipulations to the coolant circuit are not permitted and will
invalidate the warranty.
− If the cooling system becomes damaged and no ignitable gas-
air mixture can form, the room in which the appliance is located
must be well ventilated for a few minutes (according to the EN
378 standard, the room must have a minimum size of 1 m
3
per
8 g of refrigerant. Your freezer contains 21 g of refrigerant).
Transport
CAUTION!
Risk of injury.
The appliance is very heavy. There is a risk of injury due to
overstraining while lifting.
− Transport the appliance with at least one other person.
NOTICE!
Risk of damage.
Risk of damage to the appliance due to improper transport.
− The appliance should always be transported upright. If
transported at an angle of more than 45°, leave to stand for 2
hours before connecting to the mains and switching on so that
the cooling circuit can settle down.
− Do not place the appliance on its side or rear as oil may leak out
of the compressor into the coolant circuit and could block it.
− Do not expose the appliance to rain or splashes of water.
Setting up and electrical connection
Before connecting up the appliance
− After setting up the appliance, ensure that it is not standing on
the power cable.
