Cleaning and maintenance
25
− Do not put the pressure cooker in the dishwasher, as this
will destroy it.
Cleaning the base unit
− Use a soft damp cloth to clean the outer surface of the base unit
8
,
control panel
9
, heating plate
10
and handles
11
. Then let all parts dry
completely.
Cleaning the pot
− Wash the pot
7
after each use in warm soapy water with a non-abrasive
sponge. Rinse and dry thoroughly. Replace it into the base unit after
cleaning.
Cleaning the lid
If the silicone sealing ring is not fitted correctly onto the lid, this will
prevent the lid from closing properly and stop the pressure cooker
from operating normally.
1. Carefully remove the silicone sealing ring
4
and the steel plate
5
from
the lid
3
by pulling on the metal peg
6
. Remove the silicone sealing
ring from the steel plate. Wash them in warm soapy water and then dry
thoroughly.
2. Remove the pressure regulator
2
by pulling it up and off (see
Fig. J
). Rinse
with warm water and dry thoroughly before replacing it to the original
position.
3. Remove the pressure regulator cover
25
by pulling it off (see
Fig. K
). Rinse
with warm water and dry thoroughly before replacing it to the original
position.
4. Rinse the upper and underside of the lid in warm water and dry thoroughly.
Rinse the safety valve
1
and safety valve sealing ring
26
with running
water.
5. Reassemble the silicone sealing ring onto the steel plate after cleaning. Push
them onto the center post
27
on the underside of the lid. Make sure the
metal peg on the steel plate faces out (see
Fig. L
).
Cleaning the accessories
− Remove the condensation collector
13
from the base unit
8
and then
empty and wash it thoroughly. Let it dry completely and return it back to the
original position.
− Clean the rice spatula
17
, measuring cup
16
and steaming rack
15
in
soapy water with a non-abrasive sponge. Rinse and dry them thoroughly.
Summary of Contents for KY-318A
Page 4: ...4 D E C 13 22 F G H 24 23 11 11...
Page 5: ...5 J K L 2 25 26 27 28...
