SAFETY INFORMATION
WARNING
California Proposition 65
Combustion by-products produced when using
this product contain chemicals known to the
State of California to cause cancer, birth defects,
and other reproductive harm.
WARNING
BURN HAZARD
• Never leave fire feature unattended when hot or in use.
• Keep out of reach of children.
WARNING
Certain materials or items, when stored under the
fire feature, will be subjected to radiant heat and
could be seriously damaged.
WARNING
We cannot foresee every use which may be made
of our fire features.
Check with your local fire safety authority if you
have questions about fire feature use.
Other standards govern the use of fuel gases and
heat producing products for specific uses. Your local
authorities can advise you about these.
In Canada, installation must conform to local codes. If no
local codes exist, follow the current National standards
of CANADA CAN/CGA-B 149.2.
WARNING
• This product is fueled by propane gas.
Propane gas
is invisible and flammable
. An odorant is normally
added to help detect leaks and can be described as a
“rotten egg” smell. The odorant can fade over time so
leaking gas is not always detectable by smell alone.
• Propane gas is heavier than air and leaking propane
will settle to the lowest level possible. It can ignite by
ignition sources including matches, lighters, sparks or
open flames of any kind many feet away from the
original leak. Use only propane cylinders set up for
vapor withdrawal.
• Store or use propane gas in compliance with local
ordinances and codes or with ANS/NFPA 58. Turn off
propane when not in use.
WARNING
• Alert children and adults to the hazards of high
surface temperatures. Stay away from these surfaces
to avoid burning skin or igniting clothing.
• Carefully supervise young children when in the
vicinity of the fire feature.
• Do not hang clothing or any other flammable materials
from the fire feature, or place on or near the fire
feature.
• Replace any guard or protective device removed for
servicing the appliance prior to placing back in service.
• Installation and repair should be done by a qualified
service person. The fire feature should be inspected
before use and annually by a qualified service person.
More frequent cleaning may be required as necessary.
It is imperative that the control compartment, burners,
and circulating air passageway of the appliance be
kept clean.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact AEI Customer Service at (949) 474-3070 Mon-
Fri 7 a.m. to 4 p.m. PST for replacement parts or service questions.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly:
#2 Phillips screwdriver w/ medium blade (part LL)
M6 Wrench (part KK)
Leak Detection Solution (not included).
5
