MODEL 4244
4 CHANNEL FORK LIFT TRUCK MOUNTING
TRANSMITTER INSTALLATION MANUAL
Amber Controls. 3 Gisborne Close, Yoxall, Staffordshire, DE13 8NU England.
Tel: ++44-1543-372094
DOOR NUMBERS 1, 5, 9, 13 etc. to CHANNEL 1 N/O and COM TERMINALS
DOOR NUMBERS 2, 6, 10, 14 etc. to CHANNEL 2 N/O and COM TERMINALS
DOOR NUMBERS 3, 7, 11, 15 etc. to CHANNEL 3 N/O and COM TERMINALS
DOOR NUMBERS 4, 8, 12, 16 etc. to CHANNEL 4 N/O and COM TERMINALS
Note that the relay contact terminals are all volt-free.
Note that the receiver is shipped with all 4 DIP switches set to OFF for
MOMENTARY operation.
TRANSMITTER CODE PROGRAMMING
Up to 30 transmitter codes can be programmed into each receiver’s memory.
Locate the LEARN button on the receiver panel, which is next to the RED DIP
switches.
1.
Press and release the LEARN button
2.
The RED LED LD2 will illuminate.
3.
Press and release
any one
of the transmitter buttons.
4.
The RED LD2 will turn off.
5.
Press and release the same button a second time.
6.
The RED LED LD1 will flicker for a few seconds to indicate that the
programming is successful.
TRANSMITTER CODE ERASURE
1.
Press and HOLD the LEARN button
2.
The RED LED LD2 will illuminate for 8 seconds.
3.
Release the LEARN button when the LED turns off.
4.
The RED LED LD1 will illuminate for 2 seconds to confirm that all codes
have been erased.
Page 3
