MODEL 4244
4 CHANNEL FORK LIFT TRUCK MOUNTING
TRANSMITTER INSTALLATION MANUAL
Amber Controls. 3 Gisborne Close, Yoxall, Staffordshire, DE13 8NU England.
Tel: ++44-1543-372094
PROGRAMMING EACH DOOR
The model 4244 Transmitter operates in conjunction with model 4224
4 Channel Receiver.
If there are more that 4 doors to be controlled by the transmitter, it is
recommended that a coloured spot is painted on each door as follows:
DOOR 1, 5, 9, 13 etc. RED
DOOR 2, 6, 10, 14 etc. YELLOW
DOOR 3, 7, 11, 15 etc. GREEN
DOOR 4, 8, 12, 16 etc. BLUE
NOTE THAT IT IS IMPORTANT IN CONSIDERATION OF SAFETY THAT EACH
DOOR IS PROGRAMMED TO AUTO-CLOSE TO ENSURE THAT AN INCORRECT
BUTTON PRESS WILL NOT CLOSE THE WRONG DOOR.
DOOR CONTROL
It is anticipated that the remote control of each door will not affect the
operation of another door on the same channel as each 5th door is likely to be
out of operating range of the first door.
RECEIVER WIRING
Please refer to the instructions for the Amber model 4224 Remote Control
Receiver.
Although it is possible to connect each group of 4 doors to one receiver. It is
preferable to install a separate receiver for each door as the receiver’s position
with its internal antenna will provide the optimum remote control operating
range for each door
The Normally Open (N/O) and COMMON relay contacts of each receiver channel
should be wired to the related OPEN terminals of each door control unit as follows:
Page 2
