MODEL 4244
4 CHANNEL FORK LIFT TRUCK MOUNTING
TRANSMITTER INSTALLATION MANUAL
Amber Controls. 3 Gisborne Close, Yoxall, Staffordshire, DE13 8NU England.
Tel: ++44-1543-372094
ADDITIONAL TRANSMITTER CODE PROGRAMMING
If one transmitter has already been programmed into the receiver memory
then it can be used to initiate programming of further codes without removing
the receiver cover as follows:
1.
Using the existing programmed transmitter, press and release both
button 1 and button 2 together.
2.
Then press button 2. This puts the receiver into a program mode.
3.
Then press button 1 of the new transmitter TWICE.
4.
Test the operation of the new transmitter to confirm that the new code
has been stored in memory.
Page 4
REV04 4-04-2022
