Use of the machine
ZG-B
BAG0051.5 02.14
93
Some products, such as Excello granulate and magnesium sulphate,
cause increased wear to the spreading vanes (optional spreading
vanes with enhanced wear resistance are available).
When spreading mixed fertilisers, note the following:
Each variety may have different flight characteristics.
The individual varieties may separate.
The recommended settings specified for lateral distribution pertain
solely to weight distribution, not to nutrient distribution.
For new machines, after 3-4 full hopper loads, check that the
screws are tight and retighten if necessary.
Use only fertiliser with the proper grain size, of the kinds listed in
the setting chart. If the type of fertiliser is not known exactly,
check the working width using the mobile fertiliser test rig.
The technical condition of the spreading vanes, including their
swivel vanes, is essential for uniform lateral distribution of the
fertiliser on the field (i.e. forming strips).
After ever use, remove any fertiliser clinging to the spreading
vanes.
10.1
AMATRON 3
Work menu
During use, the
ZG-B
is operated via the
AMATRON 3
Work
menu.
Work menu page 1
Spreading-disc drive on/off.
For safety reasons
: press the button for
3 seconds, once the signal sounds, the
spreading discs start up.
Both slide gates open/closed
Left slide gate open/closed
Right slide gate open/closed
Enable left boom part width sections
(in 3 steps)
Enable right boom part width sections
(in 3 steps)
Disable left boom part width sections
(in 3 steps)
Disable right boom part width sections
(in 3 steps)
Fig. 62