General safety instructions
ZG-B
BAG0051.5 02.14
27
2.16.3 Electrical
system
When working on the electrical system, always disconnect the
battery (negative terminal).
Only use the prescribed fuses. If fuses are used that are too
highly rated, the electrical system will be destroyed – risk of fire.
Ensure that the battery is connected correctly - firstly connect the
positive terminal and then connect the negative terminal. When
disconnecting the battery, disconnect the negative terminal first,
followed by the positive terminal.
Always place the appropriate cover over the positive battery
terminal. If there is accidental earth contact, there is a risk of ex-
plosion.
Risk of explosion. Avoid sparking and naked flames in the area
of the battery.
The machine can be equipped with electronic components, the
function of which may be influenced by electromagnetic interfer-
ence from other units. Such interference can pose risks to peo-
ple, if the following safety information is not followed.
If retrofitting electrical units and/or components on the ma-
chine with a connection to the on-board power supply, the
user is responsible for checking whether the installation
might cause faults on the vehicle electronics or other com-
ponents.
Ensure that the retrofitted electrical and electronic compo-
nents comply with the EMC directive 2004/108/EEC in the
appropriate version and carry the CE mark.
2.16.4 Coupled
machines
Observe the permitted combination options of the attachment
equipment on the tractor and the machine drawbar.
Only couple permitted combinations of vehicles (tractor and at-
tached machine).
On single axle machines, observe the maximum permitted draw-
bar load of the tractor on the attachment equipment.
Ensure that the tractor has sufficient steering and braking power.
Machines attached or coupled to a tractor influence the driving
behaviour and steering and braking power of the tractor, in par-
ticular single axle machines with a drawbar load on the tractor.
Only a specialist workshop may adjust the height of the drawbar
on yoke bars with a drawbar load.