Orientation Aid for the Start of the Season
- ZA-TS
Version 08/2018
Page 6
5. Preparations on the implement - Section Control
→
Commissioning of the ZA-TS can only begin when the terminal is fully
configured.
→
The Task Controller or activated documentation from the internal job
management are managed through the terminal. You can find more
information in the operating manual for the respective terminal.
→
After you have configured the Task Controller in the setup of the terminal,
you also have to enter or, if necessary, check these settings on the implement.
→
To go to the Setting menu, please proceed as follows:
Press on the "User menu" button on the Start screen
(1)
. Scroll to the second*
screen
(2)
and select the "ISOBUS configuration" button
(3)
.
→
Under the Documentation point, there is the choice between "Implement
internal" and "Task Controller"
(4)
:
→
If
implement-internal documentation
is desired, select
"Implement-internal"
.
→
If work is to be performed with
job management in ISO-XML format
, select
"Task Controller"
. You can find more information in the operating manual for
the terminal.
*
It is possible that there is also a third screen, this depends on the configuration
(number of implement equipment options).
1
2
3
4
