Layout and function
XTender BAG0158.2 03.18
51
A digital scale is include in the scope of delivery.
The symbol marks the holder for the digital scale.
The holder is used to hang the digital scale
during the calibration procedure.
The communication with the control terminal in
the tractor cab takes place through the
TwinTerminal (optional). The TwinTerminal is
located in the metering area and saves the
tractor driver the walk over to the tractor cab, e.g.
when starting the calibration procedure or
entering the collected calibrated quantity.
Also during residual emptying of the hopper, the
metering roller motor, which drives the metering
roller in the metering unit, is switched on and off
using the TwinTerminal. Like with the calibration
test, the metered material is collected in a
collection bag.
For a more detailed description, refer to the
software operating manual.
