10.2 Cleaning the implement
ENVIRONMENTAL INFORMATION
Risk of environmental contamination due
to improper use of oil
Clean the implement in a cleaning area
with oil separator.
IMPORTANT
Risk of implement damage due to cleaning
jet of the high-pressure nozzle
Do not clean the implement with a high-
pressure cleaner during the first 6 weeks.
To prevent paint damage,
observe the instructions for cleaning and
care.
Never direct the cleaning jet of the
high-pressure cleaner or hot water
high-pressure cleaner onto the marked
components.
Never aim the cleaning jet of high-pressure
cleaners or hot water high-pressure
cleaners on electrical or electronic
components.
Never aim the cleaning jet of the high
pressure cleaner directly on lubrication
points, bearings, rating plates, warning
signs, and stickers.
Always maintain a minimum distance of
500 mm between the high-pressure nozzle
and the implement.
Do not exceed a water pressure of 100 bar.
CMS-I-00002692
Clean the machine with a high-pressure cleaner
or a hot water high-pressure cleaner.
CMS-T-00005229-B.1
10 | Repairing the machine
Cleaning the implement
MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE
89
