
For tilt adjustment on the other side use the plough
bodies:
4.
Move the switch tap of the running gear into
position.
5.
To lift the implement using the running gear,
Actuate the "blue" tractor control unit.
6.
Lift the implement via the tractor lower link.
7.
To turn the plough bodies,
Actuate the "green" tractor control unit.
8.
Lower the implement again.
9.
Adjust the tilt angle in the same way on both
sides.
NOTE
The stop must be very slightly unscrewed out of
the thread.
6.3.3 Manual adjustment of the plough body working depth
The working depth of the plough bodies is adjusted
via the height of the tractor lower link and via the
running gear wheel.
Spacer elements of different thickness are available
for adjustment. The set working depth can be read-
out on the last spacer element. The scale values do
not show the working depth in cm.
CMS-T-00006525-B.1
6 | Preparing the machine
Preparing the implement for operation
MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE
55