Eliminating faults
8
Errors
Cause
Solution
The implement does not reach the
desired working depth
The soil is too hard.
Draw transverse furrows at the
ends of the field.
The working depth is incorrectly
adjusted.
Adjust the working depth.
The shares are worn.
Replace the shares.
The wrong share is being used.
Use an interchangeable tip.
The disc coulter is set too deep.
Set the disc coulter shallower.
Plough body not working
The shear bolt of the overload
safety is broken.
CMS-T-00007179-B.1
8 | Eliminating faults
MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE
75
