Adjusting the plough
7.6.1
Disc coulter adjustment for automatic stone release
After loosening bolt
S1
and adjusting the rocker
bar
A
, the depth of the disc coulter can be
adjusted for the desired work depth so that the
hub does not touch the ground. When adjusting
rocker bar
A
, make sure that the cogs engage
smoothly and that bolt
S1
is securely tightened.
The distance between the side of the disc and
the ploughing tackle should be between 1 and 4
cm, and at least protrude over fertiliser skimmer
coulter. This distance is achieved by rotating the
coulter shaft
C
. Rotation is enabled by loosening
the bolt
S2
.
Lateral swing of coulter is to be set using stop
(
B
).
Hektor BAG0186.1 07.19
41
