Maintenance are care
Groundkeeper Jumbo SMARTCUT BAF0008.3 05.17
57
9
Maintenance are care
The Groundkeeper Jumbo is largely maintenance free.
9.1
Oil level in the angular gearbox
The angular gearbox on the machine does not require lubrication
servicing. However, the oil level should be checked annually. The
inspection screw on the side of the gearbox must be opened (Fig. 9.1)
in order to check whether the oil level reaches up to the lower edge of
the bore hole. The gearbox must be filled with SAE 90 transmission
oil (capacity 0.45 l), if required.
9.2
Lubrication points
Depending on the intensity of work, the following areas should be
regularly lubricated with multipurpose grease:
•
Catcher hinges (Fig. 9.2-1).
•
Guide wheel fork bearing (Fig. 9.2-2).
•
Rotor bearings (the V-belt protection on the left-hand side of the
machine must be removed beforehand (WAF 13) (Figs. 9.2-3
and 9.2-4)),
•
Rear wheel fork bearing (Fig. 9.2-5),
IMPORTANT
Never operate the machine if the protective plate is not installed
at the drive as this may damage the hydraulic hoses.
Use the crank to set the height of the rear cage roller to position
3 when removing the V-belt guard; this makes it easier to re-
move.
